« Back to blog

Home Inspection: Infrared Thermography

Posted on: January 19th, 2016 | No Comments

Checking home with Infrared Thermology.Infrared thermography goes beyond what an inspector can visually see in a home inspection and exposes deeper issues. Infrared thermography captures and measures surface temperatures by creating videos and still images to display the temperature variations within the home and its exterior. The temperatures displayed on the infrared thermography inspection, shown in different colors, can mean a variety of things. Let’s take a look at what can be found during an infrared inspection and why you should get one done.

 

Energy Loss

An infrared thermography inspection has the power to detect areas in your home that are causing your energy consumption to be higher than it needs to be. Specific areas where energy loss can be detected are broken seals in double-paned windows, air-conditioner leaks, damaged heating systems, any structural problems, heat loss in walls, windows, ceilings, floors, doors, and anywhere else in your home that could be allowing energy to escape.

 

Electrical Errors

This is one area that can be quite dangerous if not addressed. Remember that most electrical problems increase the risk of fire. The infrared thermography inspection can see overloaded and undersized circuits, overheated electrical equipment, electrical faults, and circuit breakers that need to be replaced ASAP. Electrical issues can be costly if not taken care of promptly. This is an important inspection to include before purchasing a home to determine if you are getting quality electric wiring within the walls.

 

Moisture

Infrared thermography inspections can detect moisture problems before they get too far out of hand. If there has been any leaking or moisture penetrating an area of your home, the film and still image will catch it. Some issues that could lead to moisture issues are damaged and wet insulation, plumbing leaks, roof leaks, and foundation leaks. Identifying these areas as soon as possible can reduce the risk of mold build-up.

 

Before you schedule your infrared thermography inspection, there are a few tips and tricks to make sure your inspection reads as accurately as possible. Move furniture away from exterior walls and remove drapes. To get the most accurate inspection, schedule it for when there is a large temperature difference between indoors and outdoors. In the northern states, the winter is best while you have the heat on, and in southern states, summer is best, while you have the air conditioning on. Save on energy and maintain the safety of your home by setting up your infrared thermography inspection today with Inspect-It 1st®.

Martin Lenich Martin Lenich (136 Posts)

In addition to owning his own Inspect-It 1st franchise, Martin Lenich is the General Manager of Inspect-It 1st. Mr. Lenich’s expertise spans over 25 years in the inspection, design, and construction industry, branding and marketing, technical and operational management, risk management, technology implementation, as well as training. As a leader of the Inspect-It 1st team, he continuously identifies opportunities to enhance clients' experiences with Inspect-It 1st, and to keep Inspect-It 1st positioned as the industry's Gold Standard in residential and commercial property inspections. Inspect-It 1st inspectors, “provide the right balance of technical detail and business sensitivity to the art and science of property inspection” – Martin Lenich.




Tags: ,

Leave a Reply







Our home inspection company's history began in 1991 with the establishment of American Home Inspection. Over the course of the following seven years, a home inspection business prototype was developed that could be implemented anywhere in the United States. Our founders believed they had a unique methodology of providing homebuyers and sellers with consistent, professional and unbiased home inspections.

http://blog.inspectit1st.com © 2012. All Rights Reserved.